Kubota WG752 E3 Applications Manual page 63

KUBOTA Industrial Engine Application Review
1) Purpose :
One of the policies of KUBOTA Corporation Engine Division (hereinafter referred as KUBOTA ) is to assist
equipment manufacturers in the application of KUBOTA engines with the objective of improving the overall
equipment quality. One of the methods used to achieve this objective is the review, testing and documentation
(Installation Review) of an engine installation with the equipment manufacturer.
Customer satisfaction is directly related to the proper engine application in the end equipment. It is important to
obtain the best possible installation in all equipment / applications to insure repeat sales, optimum equipment
reputation and reduced warranty claims.
KUBOTA is responsible for performing Engine Application Review for KUBOTA direct OEM and KUBOTA
Distributors are responsible for Distributor OEM and retail applications respectively. In case KUBOTA Distributors
request KUBOTA the supply of OEM Specified Engine, completed Engine Application Review forms should be
sent to KUBOTA Engine Engineering Dept. via KUBOTA Engine Global Marketing Dept.. KUBOTA Engine
Engineering Department will review and inform the registration number will comments to KUBOTA Distributors via
KUBOTA Engine Global Marketing Dept.
Improper application or installation without a registered Application Review can result in denial of warranty.
2) Application Review Forms :
Following forms are used for KUBOTA to review its Direct OEM product.
recommended to use the same forms for the review.
This check sheet describes only 'B-1', 'b-2' and 'b-3' that should be checked specially for Small SI Engines.
Please use the Application Check Sheet for Diesel Engines, together.
Review Form - (a) :
- Engine Application Sheet 1/3 : required technical factors and environmental conditions
- Engine Application Sheet 2/3 : power requirement as per each PTO system and
- Engine Application Sheet 3/3 : product type, engine mounting system and
- Engine Performance, Maintenance and Safety Check Sheet (B-1) for Small SI Engines
- Engine Specification Sheet (B-2---1/2, 2/2)
Review Form - (b) :
- All of the Review Form - (a) sheets and
- Engine Operation Measuring Data Sheet (b-1)
- Temperature Measuring Sheet (b-2) for Small SI Engines
- Vibration Measuring Sheet (b-3) for Small SI Engines
New part of Modification Request and Part Change Information & Agreement Sheet (C-1), (C-2)
3) Supplement :
The purpose of this application review is, as mentioned in the paragraph 1), to assist equipment manufactures in
the application of Kubota engines with the objective of improving overall equipment quality. In this object, Kubota
and the Kubota distributors assume no and hereby disclaim any additional liability in undertaking this review,
including but not limited to, any liability under any express or implied warranties, applicable national, state or local
laws, regulations or ordinances, or otherwise. The customer is responsible for accurately and fully completing this
engine application review and returning it to Kubota or the Kubota distributors, as the case maybe.
The customer is further responsible for confirming the suitability for different operating conditions or legal
regulations and requirements at each delivery destination.
11/jan/01
in installation (A-1)
engine model recommendation (A-2)
other technical informations (A-3)
KUBOTA Distributors are
2