Connect Your Camera To A Computer - Sanyo Xacti VPC-HD2 Instruction Manual

SHOOT, PLAY BACK AND SAVE
3
In the installation window, click on [Finish] and remove the CD-ROM
from the computer's CD-ROM drive.
<About the Kodak online service>
h When the installation window closes, a dialog box to connect to the
website introducing Kodak's online service appears. Check the [No
thanks!] option button, and then click on the [OK] button.

Connect your camera to a computer

Use the supplied dedicated USB interface cable to connect your camera to a
computer (page 7 in the SANYO Software Pack INSTRUCTION MANUAL).
Copy a video clip to your computer
Run PhotoExplorer, set the location of the camera's data as the copy source,
and copy the video clip(s) to your computer (page 18 in the SANYO Software
Pack INSTRUCTION MANUAL).
vii
English
USB CONNECTION
USB/AV terminal
To AC adaptor
Supplied dedicated USB interface cable
i Insert the plug with the [n] mark facing up.
COMPUTER
PRINTER
CANCEL
CANCEL OK
SET
To USB connector on the computer