Focus Area Setting - Sanyo Xacti VPC-HD2 Instruction Manual

FOCUS AREA SETTING

You can choose from the following 2 types of autofocus (still image shooting
only):
9-point range finder focus:
The correct focus is determined from 9 different focus points within the
shooting area visible on the monitor. When the image is focused, a target
mark & appears.
Spot focus:
The camera focuses on the subject in the center of the monitor.
1
Display the PAGE 2 Shooting Setting Screen (page 72).
2
Select the focus mode menu.
B: 9-point range finder focus is
selected.
C: Spot focus is selected.
3
Select the desired icon from the
focus mode menu, and press the
SET button.
h The focus area is set.
h When the spot focus setting is
selected, the focus mark + appears
in the center of the monitor.
40
F3.5
1/40
Focus mark
English
00:02:47
88