Copy Data From Your Camera To The Computer - Sanyo Xacti VPC-HD800GX Instruction Manual

3
In the installation window, click on [Finish].
h The installation window closes.
h Remove the DVD-ROM from your computer's DVD drive.
<About the Kodak online service>
h When the installation window closes, a dialog box to connect to the
website introducing Kodak's online service appears. Check the [No
thanks !] option button, and then click on the [OK] button.
<QuickTime is required>
h For handling video clips, please install QuickTime (page 16 in the
Xacti Software DVD INSTRUCTION MANUAL).

Copy data from your camera to the computer

Connect your camera to a computer, and copy the desired data to the
computer.
1
Turn on the computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the cable between the camera's USB/AV terminal and the
computer's USB connector.
2
Turn on the camera (page 32).
h The USB Connection Screen appears on the camera's monitor.
Supplied dedicated USB
interface cable
i Connect to the [USB]
terminal of the cable
adaptor.
v
English
USB CONNECTION
CANCEL
Supplied cable adaptor
To power outlet
To USB connector
on the computer
COMPUTER
PRINTER
CANCEL
OK