Sanyo Xacti VPC-HD2 Instruction Manual page 144

1 Date and time setting
(page 39)
h Set the camera's internal clock.
2 Screen display (page 131)
h Specify what information is
displayed on the Playback
Screen.
3 Startup display (page 132)
h Select the screen display that
appears when the camera is
turned on.
4 Operation sounds setting
(page 133)
h Select the operation sounds
that are produced when the
camera's buttons are pressed,
and adjust the operation
sound volume.
5 Post-view (page 135)
h Specify how long the captured
image is displayed on the
monitor after the still image
shooting button is pressed.
6 Wind noise reduction setting
(page 136)
h Set the wind noise reduction
function on or off.
7 Noise-reduction (page 137)
h Set the noise-reduction
function on or off.
8 Image quality adjustment
(page 138)
h Adjust the image quality during
shooting.
9 Flicker-reduction (page 139)
h Set the flicker-reduction
function on or off.
* Icons 7 through H are displayed when you toggle the SET button up or
down to scroll.
0 Digital zoom setting (page 140)
h Enable or disable the digital
zoom.
A Monitor brightness (page 141)
h Adjust the brightness of the
monitor.
B External microphone
(page 142)
h Adjust the input level of a
microphone connected to the
camera.
C Screen language (page 143)
h Select the language in which
the monitor messages are
displayed.
D TV output settings (page 144)
h Select the type of video signal
that is output from the camera's
USB/AV terminal.
E Power save function (page 149)
F File number reset (page 151)
h Select the file number reset
function.
G Card format (page 154)
h Use the camera to format the
memory card.
H Reset camera settings
(page 156)
h Reset the camera to the
factory-preset settings.
I Remaining battery power
(page 159)
130
English