Sanyo Xacti VPC-HD2 Instruction Manual page 202

Problem
The image is
too bright.
The image is
not in focus.
Viewing
images
Cause
The forced
flash mode is
selected.
The subject
was too bright.
The ISO
sensitivity
setting is
incorrect.
The subject is
too close to the
camera.
The focus
setting is not
correct.
The camera
moved when
the still image
shooting
button was
pressed.
(camera
shake)
The focus is
not locked
properly.
The lens is
dirty.
Action
Select a
different flash
mode.
Use the
exposure
correction
function.
Set the ISO
sensitivity to
t.
Capture the
image with the
subject within
the
photographabl
e range.
Select the
correct focus
setting for your
needs.
Hold the
camera
correctly and
slowly press
the still image
shooting button
halfway to lock
the focus. Then
press the still
image shooting
button all the
way to capture
the image.
Clean the lens.
English
Reference
page
66
68
90
86
42, 50
—
188