About Using The Docking Station/Cable Adaptor For Recharging - Sanyo Xacti VPC-HD2 Instruction Manual

PREPARING THE POWER
About using the docking station/cable adaptor
for recharging
The recharging operation differs depending on the position of the camera's
main switch and on the power ON/OFF status.
Recharging when the docking station is
connected
Main switch
1
* After one continuous hour of no recording or playback, the camera
switches to the power save mode (page 35).
2
* If the operation mode button
camera turns on.
3
* If the operation mode button
camera turns off and recharging begins.
4
* If the operation mode button
camera turns on and recharging stops.
Recharging when the cable adaptor is connected
Main switch
* After one continuous hour of no recording or playback, the camera
switches to the power save mode (page 35).
33
English
1
ON*
Recharges
Does not
3
recharge*
on the docking station is pressed, the
on the docking station is pressed, the
on the docking station is pressed, the
ON*
Recharges
Does not
recharge
Camera power
OFF
Recharges
4
Recharges*
Camera power
OFF
Recharges
Recharges
Power save
2
mode*
Recharges
Recharges
Power save
mode
Recharges
Recharges