Post-View Setting - Sanyo Xacti VPC-HD2 Instruction Manual

POST-VIEW SETTING

Specify the duration that the captured image appears on the monitor (post-
view) after the still image shooting button is pressed.
1
Display the Option Screen (page 128).
2
Select the post-view icon o, and
press the SET button.
h The Post-view Screen appears.
1 sec:
The post-view image is displayed
for 1 second.
2 sec:
The post-view image is displayed
for 2 seconds.
OFF:
The post-view image is not
displayed.
3
Select the desired setting, and press the SET button.
h This completes the post-view setting.
135
English
POST VIEW
1 sec
2 sec
OFF
OK