Installation - Whirlpool AWD60A Service Manual

INSTALLATION

Dimensions
A = 825 mm
B = 560 mm
C = 595 mm
Weight = 30 kg
Remove the transport packaging ( fig. 1 ) and remove the dryer rack from the top packaging ( fig. 2 ) .
Remove the tape on the front ( fig. 3 and fig. 4 ), the Wall Mounting kit attached to the Drum with
tape on the inside and the Panel film, before starting the dryer.
fig. 1
Packing accessories
Check list of the accessories and materials provided with the machine:
Owner's
Name
manual
Quantity 1
To ensure that the dryer operates normally, please ensure the following:
• The rear of the dryer must not have any restriction to the intake of fresh air.
• Check whether there is any damage to the dryer during transportation.
• A damaged dryer must not be connected. In case of any damage, contact your supplier.
• The dryer must be kept away from flammable substances.
• The surrounding environment must be dry and ventilated.
Free Standing Instructions
Unpack the dryer and ensure that it is placed on a level floor. Also ensure there is at least a 50 mm air
clearance between the back of the dryer and the wall to allow fresh air flow for efficient operation.
Tumble Dryer
A
fig. 2
Wall
mounting Panel film
kit
1 1
Page 2
B
C
fig. 3
Drying Retaining
rack clip
1
Model:AWD60A
fig. 4
Warranty
Card
2 1