Cleaning And Maintenance - Whirlpool AWD60A Service Manual

CLEANING AND MAINTENANCE

Warning
Unplug the power cord prior to any cleaning.
1. Cleaning the surface.
Wipe off dust and dirt on the body of the dryer and the surface of the main control panel.
NOTE: Do not use excessive water, just a damp cloth.
Do not use solvents.
Do not use spray cleaners when cleaning the interior.
Do not use harsh or abrasive cleaners.
2. Cleaning the filter screen.
To ensure a good ventilation effect during drying, the filter
screen must be cleaned before or after each use.
1) Removing the filter.
To remove the outlet grill, depress the release latch located
in the centre of the grill and pull.
2) Cleaning the filter.
Remove the lint with a soft brush or vacuum cleaner.
Pay attention not to damage the filter.
In addition, remove any remaining lint from the
perforated metal lint screen on the door.
3) Re-installing the filter.
After cleaning, put the screen back in place.
NOTE: Never operate the dryer without the lint filter.
Tumble Dryer
Page 11
Model:AWD60A
Metal lint screen