Preparation - Whirlpool AWD60A Service Manual

PREPARATION

ATTENTION.
1. Before operation, clean off any dust or dirt from inside the dryer drum with a damp towel.
2. Clean off any build up on the filter screen and in the duct to increase drying efficiency.
TURNING ON POWER.
Before turning on the power for the dryer, check:
• Whether the supply voltage is in accordance with the value indicated on the nameplate.
• The dryer has been grounded securely.
TREATMENT OF LAUNDRY TO BE DRIED.
• Check whether the laundry to be dried is suitable to be placed in the dryer.
• The dryer can only dry the laundry that has been spun dry. Do not put soaking wet laundry
into the dryer.
• Empty all pockets of the laundry items (such as keys and coins) and remove any adornment
that is not suitable to be dried.
• Pull up zippers, sew and mend loosened fasteners and tie up dispersed ribbons to prevent the
laundry from being entangled. If necessary, put small items into a laundry bag.
• To achieve a better drying result, shake heavy laundry to loosen it before loading into the dryer.
LOAD TO DRY.
Laundry type Cotton fabric
Maximum load
Warning:
1. Do not dry wool, silk, down and other delicate fabrics to avoid damage.
2. Do not put an excess amount of laundry into the dryer to avoid damage to the dryer
or laundry.
Approx. weights
of garments (g)
Tumble Dryer
Synthetic fabric
6 kg 3 kg
Cotton overalls 950 g
Blended fabric clothes 800 g
T shirt 300 g
Cotton jacket 800 g
Woolen blanket 3000 g
Single bed sheet 800 g
Socks 50 g
Underwear 70 g
Jeans 800 g
Pyjamas 200 g
Shirt 300 g
Page 6
Model:AWD60A