Whirlpool AWD60A Service Manual page 7

WALL MOUNTING INSTRUCTIONS
5. With assistance, mount dryer onto the wall brackets. See Fig. 4
6. A new control panel film with inverted symbols to suit your inverted dryer is supplied.
To fit this film, pull off the knob then clean surface of old film with a cloth.
Peel the release paper from the back of inverted film then place new control panel film on the
surface so that writing is the correct way around.
7. Press the Start/Pause button and hold it in the pressed position, and at the same time
turn the program dial knob from the OFF position to any other program, until the inversion
is displayed.
Caution:
Plug must be accessible after installation.
Tumble Dryer
Page 5
Model:AWD60A
Fig. 4