Table of Contents
Advertisement
C1 Manual
Last updated: 10/30/2014
Page 4 of 9
3 Server Configuration
3.1 Pool Setting
Through ' Configuration-> General Settings ', you will be able to configure your server. Pool
URL-In this field you should enter the URL of your desired pool.
Worker- This is your worker ID on the selected pool.
Password- This is the password for your selected worker.
Comment:
1. One server can be set up with three mining pools, the priority decreases from first pool
(pool 1) to third pool (pool 3). The low priority pool will start to work, only when the high
priority pool encounter fault.
2. When 'Beeper ringing' is chosen, beeper will ring once the server stops mining, otherwise
beeper won't alert, even if the Server stops mining.
3. When 'Stop running when temperature is over 80℃' is chosen, Server won't mine if the
temperature is over 80℃ to protect the server. If it's not chosen, the Server will continue mining
even if it's with high temperature.
Click 'Save & Apply' to save the settings and restart server.
Page4 / 9
Advertisement
Table of Contents
