Table of Contents
Advertisement
S4 Server Manual
Last updated:
9/29/2014 Page 4 of 8
3 Server Configuration
3.1 Pool Setting
You can configure your server through ' Configuration->General Settings'.
Pool URL- In this column you should enter the URL of your desired pool.
Worker- This is your worker ID on the selected pool.
Password- This is the password for your selected worker.
Comment:
3.1.1 Server can be set up with three mining pools, the priority decreases from first pool (pool 1)
to third pool (pool 3). The pool with low priority will start to work only when the high priority
pool breaks down.
3.1.2 With 'Beeper ringing' checked, beeper will ring when the server stops mining, otherwise
it won't ring even if the server stops mining.
3.1.3 With 'Stop running when temperature is over 80℃' checked, the server will stop mining
when the temperature exceeds 80℃' to protect the server. If it 's unchecked, the server will still
mine even in high temperature.
Click 'Save & Apply' to save and restart server.
Page 4 / 8
Advertisement
Table of Contents
