Setting The Connection Mode - Sanyo Xacti VPC-CG9 Instruction Manual

SETTING THE CONNECTION MODE

Use the dedicated USB interface cable to connect the camera to a computer.
1
Start your computer, and use the supplied USB interface cable to
connect your camera to the computer.
h Connect the camera's USB/AV terminal to the computer's USB
connector.
2
Turn on the camera (see page 29).
h The USB Connection Screen appears on the camera's monitor.
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL OK
SET button
To the USB/AV terminal on
the camera
Supplied dedicated
USB interface cable
To USB connector
on the computer
158
English