Dismounting The Camera - Sanyo Xacti VPC-CG9 Instruction Manual

4
Select "CARD READER", and press the SET button.
h The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
h The card is recognized (mounted) as a disk, and the [XACTI_INT (E:)]
icon appears in the [My Computer] window.
* The drive name (E:) may be different on your computer.
<If the access menu (page 168) appears>
h Click on [Exit] to cancel the access menu.
5
Select an action.
h If the [XACTI_INT (E:)] window appears automatically, select the
desired procedure from the window.

Dismounting the camera

CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
corrupt the files in your camera.
1
Left-click on the icon for safely removing hardware in the task tray.
h A list appears showing the devices connected to the computer's USB
connector.
<Windows Vista>
h Close the window.
2
Left-click on the camera drive (E:).
h The camera can now be disconnected.
* The drive name (E:) may be different on your computer.
No software is included with this camera. Instructions for obtaining
the software can be found on page 167.
vi
English