Playing Back On A Tv - Sanyo Xacti VPC-CG9 Instruction Manual

PLAYING BACK ON A TV

i After connecting the camera to the television, switch the TV input to the
terminal to which the camera is connected.
i When the camera is connected to a TV, no image appears on the camera's
monitor.
i The playback method is the same as when viewing images on the
camera's monitor.
Audio playback: see page 82
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
<About the image display>
When the camera is connected to a TV, the images appear either on the
camera or the TV.
"TV SYSTEM" setting
(page 142)
Supplied AV interface
cable
Camera
monitor
Recording
mode
Camera
monitor
Playback
mode
m: Output n: Not output
h If the dedicated AV interface cable is connected or disconnected during
recording or playback, recording/playback is discontinued.
NTSC
Not
connected
m
TV —
m
TV —
Not
Connected
connected
n m
m
(Field of —
view 90%)
n m
m
(Field of —
view 90%)
PAL
Connected
m
n
n
m
(Field of
view 90%)
156
English