Advertisement
Plug in the Mini Hub
2
Go to the part of your home where you want to
improve your wireless signal. Then plug the Mini
Hub into a power socket on the wall and switch
the socket on. Check that the Mini Hub is also on.
The
Power
light will come on first then, within a
minute, the
Wireless
and
Data light
Wireless light
Power light
You'll need this card
for step 3.
Data
lights too.
Mini Hub
Connect to your BT Mini Hub's Wireless:
Wireless Network names:
Wireless Password/key:
XXXXXXXXXXX
2.4 GHz: BTMiniHub-XXX
5 GHz: BTMiniHub-XXX-5
8888WWWW
Admin Password :
Connect your devices
3
You'll need your Mini Hub's wireless network name
and password. They're on the back of your Mini Hub.
If your device supports WPS,
just press
(WPS) on
your Mini Hub. It's a quick
way to connect.
Know your networks
The Mini Hub is dual-band, so you'll see two
network names on the card, one for the 2.4GHz
band and one for the 5GHz band. The wireless
password is the same for both.
Don't want to use wireless?
Using an Ethernet cable, connect your device to
either Ethernet port on the top of the Mini Hub.
For more help, go to bt.com/help/minihub
WPS
All done.
5
Hide quick links:
Advertisement
