Table of Contents
Advertisement
Menu Step
14.
Level
For controls and indicators information refer to
Temperature
Indicators , page
This step shows the present level probe temperature.
1 1 . . Press the program button to continue onto the Protection Temperature
15.
Protection
For controls and indicators information refer to
Temperature
Indicators , page
This step shows the present protection probe temperature.
1 1 . . Press the program button to continue onto the CPU Temperature reading.
16.
CPU
For controls and indicators information refer to
Temperature
Indicators , page
This step shows the present PC board temperature.
1 1 . . Press the program button to continue onto the Analog reading.
17. Analog Info
For controls and indicators information refer to
(<1> 2344)
Indicators , page
This step displays the present status of any channel of the controller's a-to-d
converted. This feature may be useful to a technician troubleshooting the fryer
or controller.
1 1 . . The displayed value can be toggled between volts and bits by pressing
2 2 . . Press the program button to continue onto AC Volts reading.
18. AC VOLTS
For controls and indicators information refer to
Indicators , page
This step displays the present status of the line voltage supply to the fryer. This
displayed value is averaged over a 10 second period, so brief dips or
fluctuations in the voltage might not show up in the display.
1 1 . . The voltage is normally displayed as a "percent of nominal" value where
2 2 . . Press the program button to continue onto Amps Info reading.
11.
reading.
11.
11.
11.
product selection 1. If the displayed value has a decimal point, it is
voltage (0 to 5 VDC). If no decimal point is shown, the value is a-to-d bits
(0 - 4095).
11.
100% would indicate that voltage is right on the nominal value (i. e. 208
volts for a 208v fryer). The display can be toggled to an actual voltage
value by pressing product selection 6.
Description
3.1 User Interface Controls &
3.1 User Interface Controls &
3.1 User Interface Controls &
3.1 User Interface Controls &
3.1 User Interface Controls &
53
Advertisement
Table of Contents
