Pause/Wait Dialing - Samsung Galaxy S4 Mini User Manual

Pause Dialing
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or financial phone
numbers.
•
2-Second Pause automatically sends the next set of numbers
after a two-second pause. This is indicated in the number string
as a comma (,).
1. From the Home screen, tap
on-screen keypad to enter the phone number.
2. Press and then tap Add 2-sec pause. This feature
adds an automatic two-second pause.
3. Use the keypad to enter the additional numbers that
are dialed automatically after the second pause.
Tip: You can create pauses longer than three seconds by
entering multiple 2 second pauses.
4. Tap .
58
and use the
By accessing this document, the recipient agrees and
acknowledges that all contents and information in this document (i) are confidential and proprietary information
of Samsung, (ii) shall be subject to the non-disclosure regarding project H and Project B, and (iii) shall not be
disclosed by the recipient to any third party. Samsung Proprietary and Confidential
Wait Dialing
Inserting a Wait into your dialing sequence means that the
phone waits until it hears a dial tone before proceeding with
the next sequence of numbers.
•
Wait sends the next set of numbers only after tapping Yes. This is
indicated in the number string as a semicolon (;).
Note: Do not add multiple Waits (;) to a number string as this
will continue to prompt you after each sequence.
1. From the Home screen, tap
on-screen keypad to enter the phone number.
2. Press and then tap Add wait. This feature causes
the phone to require your acceptance before sending
the next set of entered digits.
3. Tap .
4. Once prompted to Send the following tones?, tap Yes to
dial the remaining digits.
and use the