Configuring The Server; Setting Up The Pool - BITMAIN ANTMINER D3 Installation Manual

4. Configuring the Server

4.1 Setting Up the Pool

To configure the server:
1. Click General Settings.
2. Set the options according to the following table:
Option
Pool URL Enter the URL of your desired pool.
Worker Your worker ID on the selected pool.
Password The password for your selected worker.
3. Click Save & Apply.
The D3 server can be set up with three mining pools, with decreasing
priority from the first pool (pool 1) to the third pool (pool 3).
The pools with low priority will only be used if all higher priority pools are
offline.
- 11 -
D3 Server Installation Guide
4. Configuring the Server
Description