Administering Your Server; Checking Your Firmware Version; Upgrading Your System - BITMAIN ANTMINER D3 Installation Manual

6. Administering Your Server

6.1 Checking Your Firmware Version

To check your firmware version:
1. In System, click the Overview tab.
2. File System Version displays the date of the firmware your server use. (Screenshot below of S9 server
just for your reference to display the message, the message shows on your computer shall prevail.

6.2 Upgrading Your System

Make sure that the D3 server remains powered during the upgrade process. If power fails
before the upgrade is completed, you will need to return it to Bitmain for repair.
To upgrade the server's firmware:
1. In System, click Upgrade.
2. For Keep Settings:
Select the check box to keep your current settings (default).
■
Clear the check box to reset the server to default settings.
■
3. Click the
(Browse) button and navigate to the upgrade file. Select the upgrade file, then click Flash
image. A message appears notifying you if the D3 server firmware can be upgraded and if yes, will then
- 14 -
D3 Server Installation Guide
6. Administering Your Server