Extension Cable Installation - Bennett Marine BOLT129 Installation & User Manual

Installing the Actuator
Extension Cable
Please note that a relay module is only
required for BCI and BCN caontrols.
The BRC control does not require a relay
module. The BRC control may be directly
connected to the actuators using the helm
display extension cable.
• An actuator extension cable may
need to be run from each actuator
to the location of the relay module.
• Note that the actuator extension
cable has a male connector on one
end and a female connector on the
other. The male end must go to the
relay module, and the female end
must go to the actuators.
• Carefully run the cables through
the boat so that the female end is
in close proximity to the actuators,
and that the male end is in close
proximity to the controls.
• Mark the cables to indicate port
and starboard.
• Connect the port relay module
extension cable to the port actuator,
and the starboard extension cable
to the starboard actuator.
22

Extension Cable Installation

Installing the Display
Extension Cable
Please note that a display extension cable
is only required for BCI and BCN controls.
The BRC control does not require a relay
module. The BRC control may be
directly connected to the actuators using
the helm display extention cable.
• A display extension cable may need
to be run from the BCI/BCN helm
display to the relay module.
• Note that the display extension
cable has a male connector on one
end and a female connector on the
other. The female end must go to
the relay module, and the male end
must go to the helm display.
• Carefully run the cables through
the boat so that the female end is in
close proximity to the helm display,
and that the male end is in close
proximity to the controls.
Reconnect the Battery
• Reconnect the positive (+) battery
cable or turn the battery disconnect
switch to the ON position and
check the system for functionality.
For dual station or dual actuator
applications, refer to the wiring diagrams
beginning on page 24.
Bennett Marine | Bolt Electric Trim Tab System