Horizontally Mounting The Access Point With Optional Horizontal Mount Plate - Cisco Aironet 1530 Series, 1532 Installation Manual

Chapter 2 Installing the Access Point
Figure 2-12
1
3
Step 8 Continue with the

Horizontally Mounting the Access Point with Optional Horizontal Mount Plate

The pivoting pole mount kit also contains a plate that allows the option of the AP enclosure to be
mounted horizontally (See
Table 2-5
Materials Required
Ground lug and screws (provided with access point)
Pivoting mount kit and hardware
(8) M6 x 12-mm Hex-head Bolts
Adapter bracket for option horizontal mount
Two stainless steel band clamps (adjustable 2"-5", 51 mm -
127 mm)
Two stainless steel band clamps (adjustable 5"-8", 127 mm -
203 mm)
Crimping tool for ground lug, Panduit CT0720 with
CD-720-1 die (http://www.panduit.com)
Four wall mounting screws (6mm max)
Four wall anchors (specified for all material)
OL-30864-01
AP Pivot Mounted
1
2
Bolted Bracket Mounting Holes
Pole
Grounding the Access Point, page 2-40
Figure
Materials Needed to Mount the AP on a Vertical Pole with the Pivoting Mounting Kit
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
2 Mounting Slots
4
Metal Band Mounting Straps.
For the kit which uses a clamp instead of
metal bands, see
2-13).
Mounting the Access Point
Figure 2-10.
In Kit
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
3
4
2-23