Cisco Aironet 1530 Series, 1532 Installation Manual page 50

Mounting the Access Point
Figure 2-8
Table 2-3
Materials Required for mounting AP on a vertical wall
with pivoting mounting kit
Ground lug and screws (provided with access point)
Pivoting mount kit and hardware
(8) M6 x 12-mm Hex-head Bolts
Adapter bracket for option horizontal mount
Two stainless steel band clamps (adjustable 2"-5", 51 mm -
127 mm)
Two stainless steel band clamps (adjustable 5"-8", 127 mm -
203 mm)
Crimping tool for ground lug, Panduit CT-720 with CD-720-1
die (http://www.panduit.com)
Four wall mounting screws (6mm max)
Four wall anchors (specified for all material)
Drill bit for wall anchors
Electric drill and standard screwdriver
#6 AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable
Grounding block
Grounding rod
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
2-18
Pivoting Mounting Kit Dimensions
17.10
.67
SLOT LENGTH
Materials for Mounting on Wall with Pivoting Mounting Kit
Chapter 2
100
3.94
[4.0]
.16
SLOT WIDTH
In Kit
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
Installing the Access Point
4X 6.5MM THRU
2x M8 THRU
56
2.20
28
1.10
OL-30864-01