Add An Ipv4 Static Route - NETGEAR BR500 User Manual

• You use an ISDN router on your home network for connecting to the company where
you are employed. This router's address on your LAN is 192.168.1.100.
• Your company's network address is 134.177.0.0.
When you first configured your router, two implicit static routes were created. A default
route was created with your ISP as the gateway and a second static route was created
to your local network for all 192.168.1.x addresses. With this configuration, if you attempt
to access a device on the 134.177.0.0 network, your router forwards your request to
the ISP. The ISP forwards your request to the company where you are employed, and
the request is likely to be denied by the company's firewall.
In this case, you must define a static route, instructing your router that 134.177.0.0 is
accessed through the ISDN router at 192.168.1.100. Here is an example:
• Through the destination IP address and IP subnet mask, specify that this static route
applies to all 134.177.x.x addresses.
• Through the gateway IP address, specify that all traffic for these addresses is
forwarded to the ISDN router at 192.168.1.100.
• A metric value of 1 works fine because the ISDN router is on the LAN.

Add an IPv4 static route

You can add an IPv4 static route to a destination IP address and specify the subnet mask,
gateway IP address, and metric.
To add an IPv4 static route:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > Static Routes.
The Static Routes page displays.
Manage the LAN and VLAN
Settings
Insight Instant VPN Router BR500
88 User Manual