Add A Device To Or Remove It From The Blocked List - NETGEAR BR500 User Manual

A table displays the detected device name, MAC address, and connection type of
the devices that are not connected but allowed to access the network.
6. To add a device to the allowed list, do the following:
a. Click the Add button.
The Add Allowed Device slide-out panel opens.
b. Enter the MAC address and device name for the device that you want to allow.
c. In the Add Allowed Device slide-out panel, click the Apply button.
The device is added to the allowed list on the Access Control page.
7. To remove a device from the allowed list, do the following:
a. Select the check box for the device.
b. Click the Delete button.
The device is removed from the allowed list.
8. Click the Apply button.
Your settings are saved.

Add a device to or remove it from the blocked list

If you set up an access list that allows all new devices to access your network but you
want to block some devices, you must specify the devices that you want to block.
To add or remove a device that is blocked:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn't change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > Firewall > Access Control.
The Access Control page displays.
Manage the Firewall and
Security
Insight Instant VPN Router BR500
54 User Manual