Heartland WaveReader G6 Linking/Deleting Instructions page 6

3.3 PIN Screen
PIN Screen
Enter PIN #
__ __ __ __
ENT when Done
Enter PIN #
* * * *
ENT when Done
3.4 Selection Screens
The available options can be viewed on the selection screens. Linking and Deleting use the Selection 2
Screen.
Selection 1 Screen
Selection 1
1) Show Info
2) Send TXNs
3) Show IP
Selection 2 Screen
Selection 2
1)Reader Names
2)Configure ZB
3)Utility
Selection 3 Screen
Selection 3
1) Show Sales
2) EID/MEID
Proprietary Notice: This document and the information contained herein is the property of Heartland Payment Systems. This document is provided for
customer information and evaluation purposes only, and does not represent any transfer of intellectual property to the customer. No part of the document
can be reproduced or distributed to third parties without the express written permission of Heartland Payment Systems.
WaveReader to WaveController
Linking/Deleting Instructions
DCN: DOC-WaveControllerLink
You must enter the PIN number to access most functions. If you do
not remember your PIN #, call 1-800-332-4835, then Press 2.
? ?
Press ,
When numbers are pressed,
Press the Button
Note: Future Release will have a Configurable PIN code via setup
webpage.
Entering Correct PIN will display the Selection Screen 1
Use the
Selection Screens
Press
? ?
, ,
*
is displayed.
and Buttons to move between
Button to return to Status Screen
Page 6 of 13
Feb 6, 2012
Release Date