Advertisement
Quick Links
Advertisement
Related Manuals for Heartland WAVEREADER G6
Summary of Contents for Heartland WAVEREADER G6
- Page 1 EMV Machine Mounting Guide Alliance Metercase Mount Models Coin Conversion DOC-068036 Rev. A...
-
Page 2: Tools Needed
STOP Please make sure the machine is unplugged before you start. Tools Needed: Phillips Screwdriver KIT-068039 Standard Metercase EMV Reader KIT-068040 High Capacity Metercase Bracket part number and information is located in the back interior of part. Please be sure that it matches: ... - Page 3 Insert cable through coin drop opening from inside machine so that the connector is on the outside. It does not matter which end is used as they are the same. Remove hardware from the back of the reader. The hardware should come with the reader.
- Page 4 Attach EMV Reader to bracket using the hardware provided for the reader. Insert cable end connector from outside of machine into RS 232/USB slot on EMV Reader while attached to bracket as shown. DOC-068024 Rev. A Page | 3...
- Page 5 Remove wingnut and larger washer provided on bracket. This will be used in the next assembly. Assemble EMV Reader bracket to vault by allowing the threaded stud to pass through the coin drop opening. Secure from the back with larger washer and wingnut.
- Page 6 Finished assembly should appear similar to the image shown below. DOC-068024 Rev. A Page | 5...
- Page 7 2115 Chapman Road, Suite 159 Chattanooga, TN 37421 Tel: 800-332-4835 Fax: 423-855-7554 For Sales inquiries: MicroPayments@e-hps.com To Submit Purchase Orders: HMPOrders@e-hps.com For Support Requests: HMPSupport@e-hps.com DOC-068024 Rev. A Page | 6...