Heartland WaveReader G6 Linking/Deleting Instructions page 12

Step 3: View/Delete Machine Information
Machine Information
001 12AB
1) Get Config
2) Delete Link
Step 4: Restart Step 2 if more Reader and Zigbee Links will be deleted
Step 5: Save Changes
Select Machine Name
Machine Name
1) ID: 001
2) Next Name
3) Save All
Step 6: Exit out of Configuration Mode.
Status Screen
IP: Connected
XB: Idle
HP: Idle
SH: Idle
Proprietary Notice: This document and the information contained herein is the property of Heartland Payment Systems. This document is provided for
customer information and evaluation purposes only, and does not represent any transfer of intellectual property to the customer. No part of the document
can be reproduced or distributed to third parties without the express written permission of Heartland Payment Systems.
WaveReader to WaveController
Linking/Deleting Instructions
DCN: DOC-WaveControllerLink
 Top of the screen shows the Machine Name and the Zigbee
Address associated with it.
 If there is no Zigbee address associated with the name,
NO_ZB will appear next to the Reader Name
 Press the
Not currently available.
 Press the
Machine Name and Zigbee Address.
 If a Reader and Zigbee Link has been deleted, save the change
by Pressing the
 When complete, continue to Press the
to the Status Screen. This will exit Configuration Mode
 Now when the WaveController responds to the WaveReaders,
the WaveReaders will display Insert Card
Release Date
Button to get Reader Configuration. Note:
Button to delete the link between the
Button
Page 12 of 13
Feb 6, 2012
Button to return