Rane CP 64 Operator's Manual page 5

ZR 1
PROGRAM
SELECT
LEVEL
RETAIL / SHOP FLOOR
• If the phone system selects Zone(s), set the PAGE 1 ZONE ASSIGN to Zone 1 and PAGE 2 ZONE ASSIGN to Zone 2. This
allows the telephone paging system to page Zone 1, Zone 2 or BOTH. The setting of the internal Page Priority switch does
not matter.
• Set the internal Zone 1 and Zone 2 Page switches to Post-VCA. This allows independent control of Zone level and Page
level.
• Set the Program PRIORITY ASSIGN switch to Zone 2. This sends pre-recorded advertisements or break-bell tones to the
retail space or shop floor, respectively. You may wish to shorten the internally set Priority Release Time.
• Set the Zone 1 Expand source switch to PAGE for Office Page.
• Set the Zone 2 Expand source switch to PROGRAM for Telephone music-on-hold.
• Set both Zone PROGRAM SELECT switches to RMT to enable the ZR 1 remotes.
SYSTEM 2 : SMALL MANUFACTURING / SMALL OFFICE / RETAIL STORE
RESTROOMS
CD PLAYER
ZR 1
PROGRAM
SELECT
LEVEL
MEETING/
DEMO ROOM
OFFICES
PAGE
Manual-5