Upgrading And Remanufacturing With The Factory Image; Software Upgrading - Visual Tools AX-TV User Manual

This window works like the AX-TV remote control but can be used in any mobile device with network
connection.
4.2.1. Configuration from a Web browser
Click on the setup button to enter the camera configuration screens of the AX-TV
Any configuration related to the cameras can be edited, but you cannot modify the system settings like
the network, language or the advanced configuration.
See the Settings chapter for more details

5. Upgrading and Remanufacturing with the factory image

5.1. Software Upgrading

The unit has a firmware updating system to upgrade the AX-TV. The upgrades can be obtained from our
website www.visual-tools.com.
You will need a USB memory to put the upgrade on the AX-TV. The process is as follows:
1. Download the .ZIP file with the update.
2. Unzip the downloaded file and check it has the .IMG update file and the .TXT documents with
instructions.
3. Copy the .IMG file on the USB memory root. Warning: make sure that you copy the .IMG file, not
the .zip one.
4. The AX-TV has to be connected to the TV/monitor to follow this process. Connect the USB memory
with the image file to the AX-TV.
5. Remove the AX-TV power supply. Turn the AX-TV upside down and press with a sharp object the
firmware upgrade button marked "upgrade" on the case.
6. Connect the power supply again, holding the upgrade button pressed for a few more seconds. The
screen will show a menu with several options.
User Manual - 16