Panasonic SFB-HC Instruction Manual page 11

<In case this device cannot be connected between SF4B / SF4B<V2> series and the connecting cable>
This device can be connected to SF4B / SF4B<V2> series by using the connection cable
with a connector on one end (optional).
<For PNP output>
Connecting cable
with a connector
on one end
Connecting cable with a
connector on one end
This device
Connection cable with a connector on one end: 2 pcs./set
Model No. Cable length
SFB-CC3
SFB-CC10
SFB-CC3-MU
SFB-CC10-MU
‡ The setting procedure remains the same.
‡ The control output (OSSD 1 / 2) of SF4B / SF4B<V2> series is set to "OFF" while this de-
vice has been connected. (The safety output 1 / 2 of SF-C14EX is also set to "OFF" while
SF-C14EX has been used.) Once the setting is completed, turn OFF the power, remove this de-
vice and then turn ON the power again.
© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49V
+
24V±10%
-
Description
3m
For 8-core cable
10m
3m
For 12-core cable
10m
Connecting / Setting Procedures
<For NPN output>
Connecting cable
with a connector
on one end
24V±10%
Connecting cable with a
connector on one end
This device
+
-
10