Adjusting The Fan Speed; Fan Only - Sanyo KS1271 Instruction Manual

2. Adjusting the Fan Speed

A. Automatic fan speed
B. Manual fan speed

3. Fan Only

OI-803-13-EG
Operation with the Remote Control Unit (continued)
NOTE • Choose the best position in the room for the remote control unit, which also
acts as the sensor for room comfort and transmits the operating instructions.
Once you've found this best position, always keep the remote control unit
there.
• This appliance has a built-in 5-minute time delay circuit to ensure reliable
operation. When the operation button is pressed, the compressor will start
running within three minutes. In the event of power failure, the unit will stop.
Simply set the FAN SPEED selector button to the
This automatically sets the best fan speed for the room temperature.
If you want to adjust fan speed manually during operation, just set the FAN
SPEED selector button as desired. [
STEP 3
If you want to circulate air without any temperature control, follow these steps:
STEP 1
STEP 2
STEP 3
, , or
STEP 2
STEP 1
Press the MODE selector button to switch to the fan mode
Press the ON/OFF operation button.
Press the FAN SPEED selector button to select the fan speed of
your choice ( , or
position.
]
).
.
13