Draytek VigorAP 910C Quick Start Manual page 15

802.11ac ceiling-mount access point

Hide thumbs Also See for VigorAP 910C:

Table of Contents

5. Open

Wireless Setting

you should change the SSID name, security method and default wireless

password. Click OK to save the settings.

Note

SSID Naming: When giving your SSIDs names, you may want to give them

names which indicate their band, in order that it's easy to determine if you're

using 2.4 or 5Ghz. For example, you could call your SSIDs Henry and Henry_5,

respectively. The defaults are DrayTek and DrayTek_5G.

(5GHz)>>Security. As with the 2.4Ghz band, above,

Under System Maintenance, you can change the access

point's default admin password. You should do this

immediately in order to prevent users from accessing the

VigorAP's management interface and changing settings.

Table of Contents

Need help?

Do you have a question about the VigorAP 910C and is the answer not in the manual?