Draytek VigorAP 910C Quick Start Manual page 13

4 . 5 W e b C o
4 . 5 W e b C o
Before using your VigorAP, you should confirm other settings:

The VigorAP's LAN IP address

SSID and Security setting for 2.4G and 5GHz bands

Administrator's name and password.

Time and date.
1. Open the main screen of VigorAP 910C.
2. Open LAN>>General
from your LAN DHCP server (your router) so leave 'Enable DHCP Client'
enabled, otherwise manually set it here. Click OK to save the settings.
n f i g u r a t i o n
n f i g u r a t i o n
Setup. Usually, your AP will gets its LAN IP address