Setup; What Is Setup; Using The Pc Card Under Windows Using The Standard Com Driver Software Com Setup Disk; Using The Pc Card Under Windows Using The Driver Library Package Api-Pac(W32) - Contec COM-1(PM) User Manual

2. Setup

This chapter explains how to set up the PC card.

What is Setup?

Setup means a series of steps to take before the product can be used.
Different steps are required for software and hardware
The setup procedure varies with the OS and applications used.
Using the PC card under Windows
Using the Standard COM Driver Software COM Setup Disk
This section describes the setup procedure to be performed before you can start developing application
programs for the PC card using the bundled CD-ROM "Standard COM Driver Software -
COM Setup Disk".
Taking the following steps sets up the software and hardware. You can use the diagnosis program later
to check whether the software and hardware function normally.
Step 1 Setting the Hardware
Step 2 Installing the Hardware
Step 3 Initializing the Software
On the CD-ROM, refer to the \PCCARD\COM(PM)\Readmee.txt file and the installation instructions
files for each OS located in the \PCCARD\COM(PM)\InstDoc.
If Setup fails to be performed normally, see the "Setup Troubleshooting" section at the end of this
chapter.
Using the PC card under Windows
Using the Driver Library Package API-PAC(W32)
Refer to the API-PAC(W32) "Hardware Installation Procedure (HWINSTU.HLP)" help file for the
procedure to follow when using API-SIO in the "Driver Library API-PAC(W32)".
If using API-SIO from API-PAC(W32), install from API-PAC(W32) instead of from the supplied
CD-ROM.
See also the following parts of this manual as required.
This chapter Step 1 Setting the Hardware
COM-1(PM), COM-1D(PM)
2. Setup
9