Supported Modes; Profibus Freeze Mode; Profibus Sync Mode; Profibus Clear Mode - Danfoss MCD 600 Installation Manual

Installation Guide | PROFIBUS Card

Supported Modes

6 Supported Modes

6.1 PROFIBUS Freeze Mode

In Freeze Mode, inputs are only updated with new data from the soft starter when another Freeze action is carried out. An unfreeze
action returns the device to normal operation.

6.2 PROFIBUS Sync Mode

In Sync Mode, commands to the soft starter are not processed until another sync action is carried out. An unsync action returns the
device to normal operation.

6.3 PROFIBUS Clear Mode

If the Master sends a global clear command, the device sends a quick stop command to the soft starter.
Danfoss A/S © 2018.09
AQ277154583779en-000101 / 175R1181 | 17