Water Pump - Subaru LEGACY 2003 Service Manual

COOLING

5. Water Pump

A: REMOVAL
1) Disconnect ground cable from battery.
2) Lift-up the vehicle.
3) Remove under cover.
4) Drain engine coolant completely.
<Ref. to CO(H4SO)-14, DRAINING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
5) Disconnect connectors from radiator main fan
(A) and sub fan (B) motors.
( A )
WATER PUMP
6) Disconnect radiator outlet hose and heater by-
pass hose from water pump.
7) Lower the vehicle.
FU-00009
8) Remove air intake duct.
9) Disconnect overflow hose.
LU-00095
10) Remove reservoir tank.
( B )
CO-00084
11) Remove radiator main fan and sub fan assem-
blies. <Ref. to CO(H4SO)-28, REMOVAL, Radiator
Main Fan and Fan Motor.>
CO(H4SO)-30, REMOVAL, Radiator Sub Fan and
Fan Motor.>
CO(H4SO)-16
CO-00085
IN-00059
CO-00086
CO-00087
and <Ref. to