Subaru LEGACY 2003 Service Manual page 28

COOLING
12) Install under cover.
13) Lower the vehicle.
14) Connect battery ground cable.
15) Fill coolant. <Ref. to CO(H4SO)-14, FILLING
OF ENGINE COOLANT, REPLACEMENT, Engine
Coolant.>
16) Check ATF level. <Ref. to AT-30, REPLACE-
MENT, Automatic Transmission Fluid.>
RADIATOR
C: INSPECTION
1) Remove radiator cap, top off radiator, and attach
tester to radiator in place of cap.
LU-00095
2) Apply a pressure of 157 kPa (1.6 kg/cm
to radiator to check if:
(1) Engine coolant leaks at/around radiator.
(2) Engine coolant leaks at/around hoses or
connections.
CAUTION:
• Engine should be off.
• Wipe engine coolant from check points in ad-
vance.
• Be careful to prevent engine coolant from
FU-00009
spurting out when removing tester.
• Be careful also not to deform filler neck of ra-
diator when installing or removing tester.
CO(H4SO)-26
CO-00094
2
, 23 psi)