Subaru LEGACY 2003 Service Manual page 31

B: INSTALLATION
Install in the reverse order of removal.
NOTE:
When the main fan motor assembly cannot be in-
stalled as is, loosen the sub fan motor assembly
securing bolts to install it.
・Refer to "COMPONENT" for tightening torque.
<Ref. to CO(H4SO)-3, COMPONENT, General De-
scription.>
Tightening torque:
4.9 N·m (0.50 kgf-m, 3.6 ft-lb)
C: DISASSEMBLY
1) Remove clip which holds motor connector onto
shroud.
2) Remove nut which holds fan itself onto fan motor
and shroud assembly.
RADIATOR MAIN FAN AND FAN MOTOR
CO-00087
CO-00046
CO-00097
CO(H4SO)-29
3) Remove bolts which install fan motor onto
shroud.
D: ASSEMBLY
Assemble in the reverse order of disassembly.
NOTE:
・Refer to "COMPONENT" for tightening torque.
<Ref. to CO(H4SO)-3, COMPONENT, General De-
scription.>
E: INSPECTION
1) Connect battery positive (+) terminal to terminal
No. 2, and negative (−) terminal to terminal No. 1.
2) Make sure the main fan motor operates properly.
Replace it if it doesn't.
COOLING
CO-00098
1 2
F17
To
CO-00202