Axis Q6000-E Mk II User Manual page 34

AXIS Q6000-E Mk II PTZ Network Camera
About events
- Live Stream Accessed – Triggers an action rule when any stream is accessed and during edge storage playback.
This can for example be used to send notifications.
- Motion Detection – Triggers an action rule when motion is detected. See About motion detection on page 27.
- Shock Detection – Triggers an action rule when the Axis product detects it has been tilted or hit. See About
shock detection on page 27.
- Tampering – Triggers an action rule when tampering is detected. See About camera tampering on page 27.
• Hardware
- Fan – Triggers an action rule if the fan is malfunctioning. This can for example be used to send maintenance
notifications.
- Network – Triggers an action rule if network connection is lost or restored. This can for example be used to
start recording to the SD card.
- Temperature – Triggers an action rule if the temperature falls outside or inside the operating range of the
product. This can for example be used to send maintenance notifications.
• Input Signal
- Manual Trigger – Triggers an action rule using the Manual Trigger button in the Live View page. See About the
controls in the live view window on page 9 . This can for example be used to validate actions during product
installation and configuration.
- Virtual Inputs – Used by VMS (Video Management System) to trigger actions. Virtual inputs can, for example,
be connected to buttons in the VMS user interface.
• Storage
- Disruption – Triggers an action rule if storage problems are detected, for example if the storage device is
unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to
send maintenance notifications.
- Recording – Triggers an action rule when the Axis product records to the storage device. The recording status
trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or
stopped to record to the storage device. Note that, this trigger can be used only for edge storage recording status.
• System
- System Ready – Triggers an action rule when the product has been started and all services are running. This can
for example be used to send a notification when the product restarts.
• Time
- Recurrence – Triggers an action rule periodically. See How to set up recurrences on page 36. This can for
example be used to upload an image every 5 minutes.
- Use Schedule – Triggers an action rule according to the selected schedule. See How to create schedules
on page 35.
About actions
You can configure several actions:
• Overlay Text – Display an overlay text. See How to include overlay text in an action rule on page 20.
• Record Video – Record video to a selected storage.
• Send Images – Send images to a recipient.
• Send Notification – Send a notification message to a recipient.
34