Section 3: Building The Power Supply; Figure 2-Empty The Power Supply Components Into A Soup Bowl; Figure 3-Silk Screen Shows Power Supply Component Locations - DYNACO PAT-5 Assembly Manual

Section 3: Building the Power Supply

This section details the process of building the power supply circuit board. Begin by
carefully emptying the contents of the parts envelope into a broad soup bowl, as shown
below. In general, you'll start with the components that lay closest to the board, working
your way towards the taller components.

Figure 2-Empty the power supply components into a soup bowl

Figure 3-Silk screen shows power supply component locations

Page 6 of 18