Printer And Media Setup In Gmg Colorproof; Create A New Printer; Media Handling And Synchronization In Gmg Colorproof - Epson SureColor SC-S80600 Quick Start Manual

4

Printer and Media Setup in GMG ColorProof

4.1

Create a new printer

A new printer can be created as usual from the output tab or from the database view. Choose any default media to start
with. Make sure that you select an ink set matching the current printer configuration. When creating a printer, a TCP/IP
address is required to establish a connection to the Epson Control Dashboard. This connection is needed to synchronize
Media with the printer.
4.2

Media Handling and Synchronization in GMG ColorProof

It is crucial that GMG ColorProof media names and media types are identical to the media names and types on the printer
and in the Epson Control Dashboard. If a media name or type is changed in GMG ColorProof, it must be modified in the
Control Dashboard accordingly. The best way to handle this is to synchronize media with the Epson Control Dashboard
first and then Synchronize with the active media.
Sync Printer Media
To synchronize the media with the printer use the "Sync Printer Media" function.
In case of Epson cloud media the emx can be imported. If .emx is imported a Calibration Set will be generated out of the
.emx information.
Synchronize with active media of the printer
To synchronize ColorProof with the active media of the printer, click the icon in the "Available Printers" list the printer on
the ColorProof "Output" Tab.
Confirm the synchronization and your printer will be synchronized with the media that is currently defined as "active
media" on the printer.
Epson SC-S80600 - GMG Quick Start Guide page 6