Headphone Socket; Mono Button - Sangean DT-220V Operating Instructions Manual

Headphone socket

In addition to the built in earphones, your radio is
provided with a headphone socket. This allows you to
use different types of ear or headphones with your
radio.
1. To use external headphones, slide the
Loudspeaker/Headphone switch to the
and plug the headphones into the headphone
socket.
2. Slide the Loudspeaker/Headphone switch to the
position to return to normal operation.
AC adaptor (not included)
The AC adaptor for use with this radio should provide
3volts DC output at 200 mA center pin negative.
Insert the adaptor plug into the DC socket on the left
side of your radio. Plug the adaptor into mains socket
outlet. Whenever the adaptor is used, the batteries
are automatically disconnected.
The AC adaptor should be disconnected from the
mains supply and the radio when not in use.

Mono button

1. If the station being received is weak, some hiss
may be audible, to reduce the hiss press the ST.
/MO. Button to switch to mono mode. The stereo
indicator will be removed from the display .
10
position