Switch On Your Device - Nokia E62 User Manual

3. Replace the battery cover.
4. To remove the memory card, remove the battery cover
and push the memory card into the device to activate
the release mechanism. Then, gently pull the card out
of your device.
Important: Do not remove the MMC card in the
middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as
the device, and data stored on the card may be
corrupted.

Switch on your device

1. To switch the device on, press the power key.
2. If the device asks for a PIN code (or UPIN code, if you
have a USIM card), lock code or security code, enter the
code, and select OK.
3. To switch the device off, press the power key.
Tip: When you switch the device on, it may
recognize the SIM card provider and configure
the correct text message, multimedia message,
and GPRS settings automatically. If not, contact
your service provider for the correct settings.
The device can be used without the phone functions when
a SIM card is not inserted or when the
selected.
The picture shows the
location of the power
key.
Offline profile is
11