Preparation - Fujitsu ASYG09KXCA Operating Manual

Preparation

Take care to prevent infants and young children from accidentally swallowing the batteries.
• To prevent malfunction or damage of the remote controller:
- Place remote controller at where will not be exposed to
direct sunlight or excessive heat.
- When not using the remote controller for an extended
period, remove the batteries to avoid possible leakage and
damage to the unit.
- Exhausted batteries must be removed immediately, and
be disposed according to the local laws and regulations of
your region.
Remote
controller
1
5 Press "CLOCK ADJUST" button to start clock setting.
6 Set the time by pressing "SELECT" button.
Each time you press the button, the value increases or
decreases 1 minute. With pressing and holding the button, the
value increases or decreases 10 minutes.
*By pressing the "TEMP." buttons (  /  ), the time indicator can
be changed from a 24-hour to a 12-hour clock.
7 Press the "CLOCK ADJUST" button again to complete the clock
setting.
Remote controller holder installation
1
Screws
OPERATING MANUAL
En-3
Remote controller
Batteries
holder
Battery (R03/LR03/AAA × 2) loading and remote controller preparation
3
2
2 3
Slide up
Insert
WARNING
CAUTION
• Obstacles such as a curtain or wall between the remote
controller and the indoor unit may affect the appropriate
signal transmission.
• If leaking battery fl uid comes in contact with your skin, eyes,
or mouth, immediately wash with copious amounts of water,
and consult your physician.
• Do not apply strong shocks to the remote controller.
• Do not pour water on the remote controller.
• Do not attempt to recharge dry batteries.
• Do not use dry batteries that has been recharged.
Indoor unit accessories
Tapping screws
(Small)
4
Notes:
• Use specifi ed type of battery only.
• Do not mix different types or new and used batteries together.
• Batteries can be used about 1 year in ordinary use.
• If the remote control range noticeably shortens, replace the
batteries, and press "RESET" button.
WLAN adapter Tapping screws
(Large)
5
7
6