Manual Time Adjustment; Date Adjustment - Sangean RCR-1 Operating Instructions Manual

MANUAL TIME ADJUSTMENT

Press Time [13] button and display will flash
will be displayed.
Press Set [16] button, the hour digits on the display will begin to
flash.
Set the hour using the + or – key [18]
Press the Set [16] button once again and the minutes digits will start
to blink on the display. Set minutes as you set hour.
Press Time [13] button to confirm time setting with a beep.
The analog clock will now adjust to the digital time displayed and the
seconds start to count. The symbol
time has not been set by the Atomic Clock but is a manual setting.
Note: If your area is on Daylight Saving Time press the Mode
[20] button once to advance the time seting 1 hour. Display will
show indicating D.S.T. time.

DATE ADJUSTMENT

Press Date button [12], date display will blink.
Press Set button [16], display will blink with the current year setting,
a beep and a small y at the end of the blinking year.
Set the year with + or – key [18]
Press Set button once again for month and date setting.
Set month and date as you set year.
Press Date button again to confirm setting.
The display should now show the correct time, date, week day,
second and the symbol should again appear showing that you
have set the clock manually.
and previous time
will appear indicating that this
GB
10