Emtek Keyed Pocket Door Mortise Lock Installation Manual

Installation Guide - Keyed Pocket Door Mortise Lock,
1
Install Lock Body
See template for door prep
specifications
4
Thread Key Cylinder
Install Key Cylinder by
threading it clockwise
onto lock body plate
Key Cylinder notch
must be at the 3 o'clock
position when fully
screwed in lock body.
7
Install Trim Plate
2
Install Drive Bar Cylinder
Use Cylinder Key to thread Drive Bar Cylinder
clockwise on interior side of door.
Note: Notch on cylinder must be in the 9 o' clock
position when fully screwed into lock body.
5 Tighten Drive Bar Cylinder
Tighten locking screw to engage
notch on cylinder
Traditional Trim
3
Mount Outside Plate
Inside
6
Mount Inside Plate
8
Install Door Jamb
See template for door jamb
prep specifications
IN4-POCKETMORTISEKYD REV. 18A 2/22/18
Drill two 7/64"
pilot holes