7-14
1
2
3
Checking the clutch switch
– Disconnect the clutch switch connector from the cable tree.
– Connect an ohmmeter to the bipolar connector AT2
Adventure) or AT1
1
Duke/R) or AT3
(950 Supermoto/R, 990 Supermoto) of the clutch
3
switch and slowly pull the clutch lever.
– The switch should close around 2/3 of the lever travel.
Reading: max. 1
Ω
Reading: ∞
when the clutch lever is not pulled
(990 Adventure) or AT1
Ω
when the clutch lever is pulled
(950
1
(990 Super
2